- Side by side driving in Gold Mining Simulator: Definitive Edition means running utility vehicles alongside the heavy mining fleet efficiently.
- Key principle: Keep routes short, refuel on schedule, and never let support vehicles block excavators or dump trucks.
- Best strategy: Use the side by side for fuel runs, inspection trips, and claim-to-claim travel, not pay dirt hauling.
- Critical tip: Plan vehicle lanes before placing wash plant and parking areas so traffic never crosses the loading zone.
- Top choice: A Fuel Truck plus a side by side covers most mid-game logistics on a single claim.
Why Side by Side Driving Matters on Your Claim
In Gold Mining Simulator: Definitive Edition, the mining operation is a production chain: excavation creates pay dirt, transport moves it, fuel support keeps machines running, and the wash plant recovers the gold. Side by side driving is the practice of coordinating your light utility vehicle with the heavy fleet so that every machine stays busy. A well-driven side by side removes the small interruptions — fuel runs, site checks, and trips between claims — that quietly eat production time.
The core loop looks like this:
| Stage | Machine | What Can Go Wrong | Side by Side Fix |
|---|---|---|---|
| Excavation | Excavator | Runs dry mid-shift | Scheduled fuel delivery runs |
| Loading | Excavator + transport | Vehicle queue blocks pit | Park support vehicle off the lane |
| Hauling | Dump truck | Long idle waits | Inspect route during haul cycles |
| Processing | Wash plant | Water or power interruption | Quick site checks between loads |
Treat the side by side as a logistics tool, not a hauler. It cannot move meaningful volumes of pay dirt, so its value comes entirely from keeping the excavator, dump trucks, and wash plant from ever waiting on you.
Planning Routes for Multi-Vehicle Traffic
Before you add a second or third machine to a claim, sketch the traffic flow. Side by side driving works when every vehicle has a predictable lane and the loading area stays clear of cross traffic.
Single Claim Loop
- One-way circuit around the dig face
- Fuel station near the exit lane
- Wash plant feed at the far end
Multi-Claim Coordination
- Side by side handles inter-claim travel
- Heavy fleet stays assigned per claim
- Fuel Truck rotates on a schedule
Night Operations
- Lighting placed along vehicle lanes
- Reduced speed on haul routes
- Support vehicle carries inspection runs
| Route Element | Recommended Placement | Avoid |
|---|---|---|
| Fuel point | Exit lane, away from the pit | Center of the loading zone |
| Parking | Off the main haul lane | Next to the excavator swing radius |
| Wash plant feed | End of the one-way loop | Mid-route, forcing reversals |
| Water pump | Closest water source to plant | Across active haul traffic |
| Lighting | Corners and lane junctions | Only at the claim entrance |
Never park the side by side inside the excavator's swing radius or behind a reversing dump truck. Collisions and blocked lanes cost far more time than the fuel run saves.
Step-by-Step: Running the Side by Side Routine
Mark the Lanes First
Before the first load of the day, drive the full circuit in the side by side and confirm the excavator, haul route, wash plant feed, and fuel point connect without reversing or crossing.
Pre-Shift Fuel and Inspection
Use the side by side to check fuel levels, water availability, and equipment condition before the heavy fleet starts. Fix problems while machines are still idle, not mid-cycle.
Support During Production
Once excavation and hauling run, keep the side by side moving on logistics: refueling the excavator when it drops low, checking the wash plant water supply, and clearing any obstruction on the lane.
Coordinate the Fuel Truck
When the operation is large enough, pair the side by side with the Fuel Truck. The truck supplies bulk fuel while the side by side confirms which machine needs it next, cutting interruptions during long sessions.
End-of-Shift Reset
Park all vehicles on the designated pad, note anything that needs repair, and leave fuel topped off so the next session starts without a logistics delay.
Following this routine keeps the excavator digging, trucks hauling, and the wash plant fed — the complete loop that generates consistent gold income.
Common Side by Side Driving Mistakes
| Mistake | Consequence | Correction |
|---|---|---|
| Hauling pay dirt in the utility vehicle | Tiny loads, wasted cycles | Use dump trucks for material |
| Parking inside the loading zone | Blocked excavator, collisions | Fixed parking pad off the lane |
| Unscheduled fuel runs | Excavator idles mid-shift | Pre-shift and scheduled refueling |
| Ignoring route planning | Reversing, crossing traffic | One-way loop, marked lanes |
| Skipping night lighting | Slow, error-prone driving | Lights along lanes and junctions |
The most expensive mistake is letting the excavator wait. If the dig machine is idle because of fuel, water, or a blocked lane, every other stage of the production chain stops with it.
Daily Operations Checklist
Before Every Production Run:
- Drive the full vehicle circuit and confirm lanes are clear
- Check fuel on excavator, trucks, and Fuel Truck
- Verify water supply for the wash plant
- Confirm parking pad is clear of the loading zone
- Top off fuel and log repairs at end of shift
FAQ
Q: Can the side by side haul pay dirt in Gold Mining Simulator: Definitive Edition?
Technically you can move small loads, but it is not efficient. Pay dirt belongs in dump trucks; the side by side is best used for fuel runs, inspections, and travel between claims.
Q: When should I buy a Fuel Truck instead of relying on the side by side?
Buy the Fuel Truck when repeated refueling trips visibly interrupt excavation and hauling. Pair it with the side by side so bulk fuel arrives where it is needed without idle time.
Q: How do I keep multiple vehicles from blocking each other?
Establish a one-way loop around the claim, place the fuel point and parking off the main lane, and keep the wash plant feed at the end of the route so no vehicle has to reverse through the loading zone.
Q: Is lighting worth it for side by side driving?
Yes, once your operation has the fuel, water, and processing capacity to make night work productive. Place lights along vehicle lanes and junctions, not just at the claim entrance.